Timnath, Colorado Sign Code & Sign Permit Guide
Wall, monument, and freestanding sign limits for Timnath by zoning district — cited to the exact code section, with the sign permit process. Every number is checked against the published code text before it ships.
Residential (R-E, R-1, R-2, R-3, R-4)
Zones like R-E
Table 7.10.10 (§7.10.10), row 'RE, R1, R2, R3, R4' — only the Freestanding columns are populated for this row; Projecting/Wall/A-Frame/Canopy are blank.
Formula-based, method unconfirmed: Section 7.7.1 measures sign area as 'a geometric shape enclosing any message, logo, symbol, name, photograph or display face...using standard mathematical formulas.' Diagram 7.7.1 shows the same example sign computed two ways (20.3 sq ft as one enclosing box vs. 17.5 sq ft grouped by word), but which method applies did not survive text extraction from the diagram — confirm with the Town before assuming the favorable multi-rectangle method is available.
Freestanding — Pole or Monument
Table 7.10.10| Maximum number | 1 entry sign per entrance. |
|---|---|
| Maximum area | 48 sq. ft. per face. |
| Maximum height | 8 ft. |
See the exact numbers
Height, setback, area, count, and lighting limits for Residential (R-E, R-1, R-2, R-3, R-4) — cited to the code section, ready to quote from.
Get notified at launch- Only Freestanding (entry monument) signage has an entry in the district table for this zone group — no other sign type is addressed for purely residential zones in Article 7's standards table.
Residential Mixed-Use (RMU)
Zones like RMU
Table 7.10.10 (§7.10.10), row 'RMU, LDMU' — Freestanding-only numbers, same as the Residential row. A separate unlabeled recap table later in the same document instead groups RMU with the full commercial sign set — a genuine conflict, not resolved; this rule follows the numbered, cited table.
Formula-based, method unconfirmed: Same §7.7.1 formula-based measurement as the Residential family; the favorable multi-rectangle method's applicability is unconfirmed from the extracted text — confirm with the Town.
Freestanding — Pole or Monument
Table 7.10.10| Maximum number | 1 entry sign per entrance. |
|---|---|
| Maximum area | 48 sq. ft. per face. |
| Maximum height | 8 ft. |
See the exact numbers
Height, setback, area, count, and lighting limits for Residential Mixed-Use (RMU) — cited to the code section, ready to quote from.
Get notified at launch- The source PDF contains a second, unlabeled 'recap' table that groups RMU with the full commercial sign allowance (Projecting/Wall/A-Frame/Canopy) instead of this restricted Freestanding-only set. Confirm with the Town before assuming any sign type beyond a freestanding entry sign for an RMU address.
Non-Residential / Commercial / Industrial (CMU, B, NC, CC, RC, I-1, C-2)
Zones like CMU
Table 7.10.10 (§7.10.10), row 'CMU, BD, NC, CC, RC, Industrial'. Live zone 'B' mapped to the table's 'BD' by the same minor-spelling-drift pattern every other zone in this document shows (RE->R-E, R1->R-1, Industrial->I-1, etc.) - an inference, flagged for review. 'C-2' included per SS3.4.5's documented conversion to NC or CC, both of which already sit in this same rule.
Formula-based, method unconfirmed: Same SS7.7.1 formula-based measurement as the Residential family; the favorable multi-rectangle method's applicability is unconfirmed from the extracted text - confirm with the Town.
Freestanding — Pole or Monument
Table 7.10.10| Maximum number | 1 entry sign per entrance. |
|---|---|
| Maximum area | 48 sq. ft. per face. |
| Maximum height | 8 ft. |
Projecting Sign
Table 7.10.10| Maximum number | 1 per first-floor commercial tenant. |
|---|---|
| Maximum area | 3 ft wide (6 sq. ft. total). |
| Height / clearance | Must be 8 ft from the sidewalk; no higher than the wall of a single-story building or the second-story window of a 2-story building; may not extend more than 4 ft from the building face. |
Wall Sign
Table 7.10.10| Maximum number | 1 per tenant building frontage. |
|---|---|
| Maximum area | 1 sq. ft. per lineal ft of frontage for the first 100 ft, plus 1 sq. ft. per 2 lineal ft thereafter, up to a 200 sq. ft. cap. |
| Maximum height | Not more than 25 in. above grade level, or higher than the eave line. |
A-Frame / Footed Vertical Sign
Table 7.10.10, §7.10.9| Maximum number | 1 per first-floor tenant space. |
|---|---|
| Maximum area (as tabulated) | 8 feet — copied verbatim from Table 7.10.10; likely a units error in the source, unresolved. |
| Physical size limit (§7.10.9) | No taller than 4 ft, no wider than 3 ft. |
| Maximum height | 4 ft. |
| Zone restriction (§7.10.9.5) | Only permitted in commercial developments within mixed-use districts, and in the NC district specifically — narrower than this rule's full zone list. |
Canopy or Awning Sign
Table 7.10.10, §7.10.3| Maximum number | 1 per tenant. |
|---|---|
| Maximum area (as tabulated) | 10 feet — copied verbatim from Table 7.10.10; likely a units error in the source, unresolved. |
| Minimum clearance | At least 8 ft above grade (§7.10.3.1 — this is a minimum clearance, not a maximum height, despite the table's own 'Max. Ht' column label). |
See the exact numbers
Height, setback, area, count, and lighting limits for Non-Residential / Commercial / Industrial (CMU, B, NC, CC, RC, I-1, C-2) — cited to the code section, ready to quote from.
Get notified at launch- 'B' is mapped to Table 7.10.10's 'BD' by pattern-matching, not a literal source match - confirm before relying on it for a Business-District (B) address.
- A-Frame/Vertical sign area is listed in the source table as '8 feet' and Canopy/Awning area as '10 feet' - these are copied verbatim; 'feet' is very likely a table-authoring error for a square-footage or width figure the source itself never resolves.
- Section 7.10.9.5 further restricts A-Frame/Vertical signs to mixed-use commercial developments and the NC district specifically - narrower than this whole zone group (which also includes CMU, B, CC, RC, I-1).
- The I-25 corridor overlay (a separate row in Table 7.10.10, not a zone) is not represented in this rule or in Sightline's zone-based routing - any address within about 1/8 mile of I-25 should be flagged for manual confirmation regardless of these numbers.
Sign permits in Timnath
Town of Timnath — 970-224-3211, timnath.org/planning/
Timnath sign code FAQ
What is the sign code for Timnath, Colorado?
Timnath's sign regulations are set by Article 7 Signs · Timnath Land Use Code PDF, and vary by zoning district. Sightline tracks 3 verified zone families for Timnath below, each with wall, freestanding, and other sign-type limits cited to the exact section.
Do I need a permit for a sign in Timnath?
In nearly every Colorado municipality, including Timnath, permanent signs — wall signs, channel letters, cabinets, monument signs — require a sign permit. Timnath's permit process is linked below. Always confirm with the authority having jurisdiction before finalizing a design.
Look up an exact address in Timnath
Get the live zoning district and the sign limits that apply to a specific parcel, with a frontage calculator and a permit-ready citation.
Get notified at launch