Colorado Springs, Colorado Sign Code & Sign Permit Guide

Wall, monument, and freestanding sign limits for Colorado Springs by zoning district — cited to the exact code section, with the sign permit process. Every number is checked against the published code text before it ships.

Commercial / Mixed-Use (CG, MX-*)

Zones like CG

Wall-sign allowances are set by the Commercial use category (§7.4.1307), so they hold across the commercial (CG) and mixed-use (MX-*) RetoolCOS zones. FBZ form-based zones and PUD overlays can override the table (per-parcel EnCodePlus Sign_Types_and_Criteria), so the app flags those for confirmation.

1.5 sq ft/lf
Wall sign max
25 sq ft/tenant
Minimum
Up to 3 shapes
Area method
Required
Permit

Up to 3 geometric shapes — favorable: Channel letters with no cabinet: area = up to 3 standard geometric shapes around letter groupings (includes letter spacing). Lowercase descenders don't count; customized tails do.

Wall signs / channel letters

§7.4.1307.B.1
Per-tenant area1.5 sq ft/lf of leased frontage · 2.0 if set back >200 ft
Minimum25 sq ft per tenant
Number of signs++No limit++ — within the area allowance
HeightNot past roof pitch/peak; flat-roof walls ≤50% above roofline
IlluminationInternal / channel letters ++permitted++

Shared-center signage (§7.4.1306): a tenant can use up to 1.5× their own allowed area by borrowing unused signage from the center, with an owner letter.

Freestanding (monument / pole)

§7.4.1307 Tbl 7.4.13-B
Area (commercial)0.35 sq ft/lf of lot frontage · small lots (<160 ft) get a flat 42 sq ft · max 150 sq ft
Height7 ft under 160 ft frontage; then scales 0.07 ft/lf — up to 30 ft (≥1,000 ft) / 35 ft (≥1,500 ft)
Number1 sign under 1,000 ft frontage · 2 + 1 per extra 1,000 ft
Monument option128 sq ft, 7 ft, 2 per access from a major arterial/collector (§7.4.1307D.4)
SetbackNone required for the base frontage allowance

Freestanding area scales with lot frontage (taller signs need more frontage). Mixed-Use zones: size/number/height are set by a Coordinated Sign Plan (§7.4.1308).

EMC / Digital (changeable copy)

§7.4.1307 Tbl 7.4.13-C
WhereCommercial ++permitted++ · ++not allowed++ in Residential/Office/Industrial/Civic · Mixed-Use only with a CSP
SizeIntegrated into a freestanding sign; up to 50% of allowed sign area, 1 per property
Brightness≤500 nits / 0.3 fc over ambient, dusk-to-dawn (auto-dimming)
MessageHold 10 sec · transition <1 sec, fade/dissolve only · animation not allowed

An EMC counts against the host freestanding sign's area & height limits — read the Freestanding card too.

See the exact numbers

Height, setback, area, count, and lighting limits for Commercial / Mixed-Use (CG, MX-*) — cited to the code section, ready to quote from.

Get notified at launch

Sign permits in Colorado Springs

Colorado Springs Planning — 719-385-5905 · permit via Pikes Peak Regional Building Dept.

Colorado Springs sign code FAQ

What is the sign code for Colorado Springs, Colorado?

Colorado Springs's sign regulations are set by UDC §7.4.13 Signs · PDF, and vary by zoning district. Sightline tracks 1 verified zone family for Colorado Springs below, each with wall, freestanding, and other sign-type limits cited to the exact section.

Do I need a permit for a sign in Colorado Springs?

In nearly every Colorado municipality, including Colorado Springs, permanent signs — wall signs, channel letters, cabinets, monument signs — require a sign permit. Colorado Springs's permit process is linked below. Always confirm with the authority having jurisdiction before finalizing a design.

Look up an exact address in Colorado Springs

Get the live zoning district and the sign limits that apply to a specific parcel, with a frontage calculator and a permit-ready citation.

Get notified at launch